Showing posts with label Pulse. Show all posts
Showing posts with label Pulse. Show all posts

Monday, April 25, 2011

Updating the Firmware On the eInstruction Pulse Remotes


There have been firmware updates to the RF receiver for the Mobi wireless tablet and firmware updates for the Mobi tablet itself. There also have been firmware updates for the CPS Pulse RF receiver. The Pulse remotes also have firmware updates. That is what this blog is about. This update allows a user to enter more than 20 characters to answer an essay question in CPS using the Pulse remotes. The process is relatively fast unless you have many sets to update. The first step is to see if you need to update the firware on the remotes you have. You can find out what version you are running on your remotes by pressing the menu button (located at the top of the remote), then press the right arrow key six times until you see “diagnostic”, then press send (the key below the menu button). The old version firmware on the remotes is 00.47. The new version is 00.54.

Ok, here is the update process. First of course make sure you have the RF receiver plugged in the USB port of your computer and turn on all the remotes. Also, make sure that the RF receiver and the Pulse remotes are on the same channel. Click on the eInstruction icon in the system tray and choose “eInstruction Device Manager”. Right click on the icon for the Pulse RF receiver and choose “properties”. Press the control and shift keys at the same time. You will see two more tabs appear, “update keypads” and “update base”. If you haven’t updated the firmware on your RF receiver, click the “update base” tab and update the RF receiver. Click the “update keypads” tab to update the firmware on the remotes. Click “browse”, select the 0.54 folder and click “open”. Select “English Pulsestring” and click “open”. Click “update”.

You will see a message “You are about to upload new firmware to your Pulse keypads. Do not remove the USB receiver during this process. If you are sure you want to continue, select ok, otherwise choose cancel to abort the update.”

The next step is: “Manually join all CPS Pulse clickers to channel 21 by pressing digits 21 (your channel may be different) on each clicker and then pressing send. When all clickers have joined, press ok.”

The next message displayed is: “The firmware update is currently being sent to all CPS Pulse clickers. The clicker LCD may display blank during the update, please wait until all clickers read powering down and have powered off completely and then press ok to continue.”

The last message you will see is: “The CPS Pulse firmware has been successfully updated. Press ok to end the update process.”

I hope that helps. Thanks.

Updating Your Pulse RF Receiver Firmware

If you are using eInstruction’s CPS Pulse in your classroom, you will need to update the firmware on the RF receiver. That’s the thumb drive looking item you plug into the USB port of your computer. It’s used to communicate to the CPS. If you also use the Mobi on the same computer, it would be a good idea to plug them each directly into one of the computers USB ports. You shouldn’t plug them both into a USB multiport mini hub. By doing this, both receivers will compete with each other. Also, keep in mind, signal strength is lost with the additional wire length. An analogy I use in my trainings is, “Imagine hooking up multiple T connectors to a water hose. The water pressure at one of the hose ends will not have anywhere near the pressure as the original hose end.” I also wanted to let you know that there are updates to the Workspace Mobi (8.84.0001), (CPS 6.59.0018) and CPS for PowerPoint (6.59.0018) programs. They were new in October. The update mainly occurs in the Device Manager but since this is the software that connects the RF receivers to the devices, it’s a good idea to do these updates.

Ok, enough of the rambling. Although I hope you found it useful. Here is the process of updating your Pulse and Mobi firmware.
1.) Open the Device Manager and plug in the receiver you are going to update.


2.) Select the appropriate receiver in Device Manager, and go to file and preferences.


3.) This will open up a dialog box , choose the firmware update tab. Click “check for updates”.


4.) You will be told firmware updates are available. Click ok.

5.) Click next on the confirmation screen, and you will see a list of firmware updates for your device.

6.) If the current version is the same as the available version, choose cancel. Otherwise continue.

7.) Check the box in the device column. Click update, and then click ok on the confirmation screen. A progress screen will open.


8.) When the process completes, the following screen will display with the message “firmware update complete”.

9.) Click finish.

10.) Unplug the receiver.

11.) If you have another receiver to update, return to step 1 and start the process again with the next RF adapter.

Note: If you have plugged in multiple RF receivers, it's a good idea to open the Device Manager and right click on the devices you no longer have plugged in and choose remove.